Lulzbot Taz 5 ("The Taz") 3D printer

• Common Name: The Taz
• Model Name: LulzBot TAZ 5
• Hosted? Owned?
• Qualification Required: 3d Printer Class
• Booking Calendar: NO
• Main Contact: Rob (rgristroph@gmail.com)
• Product Info: https://www.lulzbot.com/store/printers/lulzbot-taz-5

Critical Info!

• • Avoid touching the plate with your fingers: skin oil can affect performances.

Checklist Before I Start

• • Make sure the bed is clean
  • Bend the filament to nearly 180 degrees; if it breaks easily, then it's brittle and should NOT be used. Place it in a dessicator bin to restore it.
  • Home the machine; check that the nozzle is not touching the bed.
  • Heat the nozzle BEFORE inserting filament in the extruder

Checklist When I'm done

• • Remove and Store the filament
  • Make sure the nozzle is cooling down
  • Clean up the Bed.
  • Remove the previous user's filament and parts and place them on the "Finished Jobs" shelf