Difference between revisions of "Taz5"

From ATXHackerspace

Jump to: navigation, search
(Created page with "== Lulzbot Taz 5 ("The Taz") 3D printer * Common Name: The Taz * Model Name: LulzBot TAZ 5 * Hosted? Owned? * Qualification Required: 3d Printer Class * Booking Calendar: NO...")
 
Line 1: Line 1:
== Lulzbot Taz 5 ("The Taz") 3D printer
+
= Lulzbot Taz 5 ("The Taz") 3D printer =
  
 
* Common Name: The Taz
 
* Common Name: The Taz
Line 8: Line 8:
 
* Main Contact: Rob (rgristroph@gmail.com)  
 
* Main Contact: Rob (rgristroph@gmail.com)  
  
=== Checklist Before I Start
+
== Critical Info! ==
 +
 
 +
** Avoid touching the plate with your fingers: skin oil can affect performances.
 +
 
 +
== Checklist Before I Start ==
  
 
** Make sure the bed is clean
 
** Make sure the bed is clean
Line 15: Line 19:
 
** Heat the nozzle '''BEFORE''' inserting filament in the extruder
 
** Heat the nozzle '''BEFORE''' inserting filament in the extruder
  
=== Checklist When I'm done
+
== Checklist When I'm done ==
  
 
** Remove and Store the filament
 
** Remove and Store the filament
Line 21: Line 25:
 
** Clean up the Bed.
 
** Clean up the Bed.
 
** Remove the previous user's filament and parts and place them on the "Finished Jobs" shelf
 
** Remove the previous user's filament and parts and place them on the "Finished Jobs" shelf
 
=== Critical Info!
 
 
** Avoid touching the plate with your fingers: skin oil can affect performances.
 

Revision as of 22:53, 17 August 2019

Lulzbot Taz 5 ("The Taz") 3D printer

  • Common Name: The Taz
  • Model Name: LulzBot TAZ 5
  • Hosted? Owned?
  • Qualification Required: 3d Printer Class
  • Booking Calendar: NO
  • Main Contact: Rob (rgristroph@gmail.com)

Critical Info!

    • Avoid touching the plate with your fingers: skin oil can affect performances.

Checklist Before I Start

    • Make sure the bed is clean
    • Bend the filament to nearly 180 degrees; if it breaks easily, then it's brittle and should NOT be used. Place it in a dessicator bin to restore it.
    • Home the machine; check that the nozzle is not touching the bed.
    • Heat the nozzle BEFORE inserting filament in the extruder

Checklist When I'm done

    • Remove and Store the filament
    • Make sure the nozzle is cooling down
    • Clean up the Bed.
    • Remove the previous user's filament and parts and place them on the "Finished Jobs" shelf