Laser Cutter Supplies

From ATXHackerspace

Revision as of 21:23, 14 June 2012 by Rgm (talk | contribs) (Austin Plastics & Supply, Inc.)

Jump to: navigation, search


ATX HackerSpace Pages relating to
the Blue Laser Cutter
Laser cutter icon.png
Blue Laser Cutter PLS 6.60
Red Laser Cutter XL1200
Epilog Legend EXT36 75W
Laser Cutter Materials
Laser Cutter Settings
Laser Cutter Supplies
Laser Operation Class
Advanced Laser Class
Using Inkscape with the Laser Cutter
Laser Cleaning
Laser Cutter Manuals
Laser Calendar
Laser Committee
Edit this template

Where can you to buy materials to feed the Laser?


Regal Plastic Supply Company

9311 Metric Blvd
Austin, TX 78758
(512) 836-3629
M - F 8am - 5pm

Note: Regal does not have a showroom - if you show up, be prepared to specify exactly what you want over the counter. Some materials (cast acrylic) need to be ordered in advance. It is probably best to call ahead before you show up.

Interstate Plastics

800 Interchange Blvd
Ste 104
Austin, TX 78721
(512) 386-7422
Mon-Fri 8 am - 5 pm

Colorado Plastics

Colorado Plastics sells remnants once a month:

See Acrylic Sheets inventory.

Austin Plastics & Supply, Inc.

2415 Kramer Lane
Austin, TX 78758
(512) 836-1025
Mon-Fri 7 am - 4 pm

Call first. Website says hours are 8am-5pm, but this is wrong.


Fine Lumber & Plywood (Austin Fine Lumber)

9407 Brown Lane
Austin, TX 78754
(512) 836-8990
M - F 7:30AM - 5PM
Sat 8AM - 12PM

AFL carries high quality Baltic Birch plywood in several thicknesses. We have been using 5mm (6mm?) material that comes in 5x5' sheets (?)

Home Depot

various locations

1/4" (actually 5mm) Birch plywood costs ~$27 for a 4x8' sheet 1/4" (again, 5mm) lower quality plywood is available that costs ~$11 for a 4x8' sheet

They will cut it down to 18x32" with their panel saw. This will yield 6 18x32" and 3 12x32" pieces.


various locations

They also have 5mm plywood that is reportedly of a low quality (but is still usable).